Wet,Diamond,Model,grandeventstexas.com,Shaping,$248,Industrial Scientific , Lab Scientific Products , Lab Furniture,Disc,Abrasive,/lakism832845.html,Model,Trimmer,ZGOOD,Wet ZGOOD Wet Model Shaping Trimmer Diamond Max 85% OFF Disc Abrasive $248 ZGOOD Wet Model Shaping Trimmer Wet Model Abrasive Diamond Disc Industrial Scientific Lab Scientific Products Lab Furniture $248 ZGOOD Wet Model Shaping Trimmer Wet Model Abrasive Diamond Disc Industrial Scientific Lab Scientific Products Lab Furniture Wet,Diamond,Model,grandeventstexas.com,Shaping,$248,Industrial Scientific , Lab Scientific Products , Lab Furniture,Disc,Abrasive,/lakism832845.html,Model,Trimmer,ZGOOD,Wet ZGOOD Wet Model Shaping Trimmer Diamond Max 85% OFF Disc Abrasive

ZGOOD Wet Model Shaping Trimmer Diamond Max 85% 4 years warranty OFF Disc Abrasive

ZGOOD Wet Model Shaping Trimmer Wet Model Abrasive Diamond Disc

$248

ZGOOD Wet Model Shaping Trimmer Wet Model Abrasive Diamond Disc

|||

Product description

★Features★

1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve.

2. Connect the waste-disposal tube to the unit.

3. Connect the power cord, and switch on the power switch (O=off, l=on)

4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18).

5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet).

 

★Specifications★

Voltage: 220V/50Hz±10% , 110V/60Hz±10%

Power: 500W

Rotational Speed: 2800 rpm

Dimensions: 44×35×35cm

Weight of the dental trimmer: 20kg

 

★Attention★

If there is some abnormal noise when working on

Possible reason:① Axon is loosing ② Disc is not plain enough。

How to solve it:①Dissemble the disc⒃ with spanner,make the snap Ring tightly;② change the disc。

The machine does not work when power on

Possible reason:① fuse get burnt;② motor get burnt;③ switch get wrong.

How to solve it:① change the fuse(22) which inside the socket;② change the motor;③ change the switch。

 

★Packing list★ 

Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment *1

Power cord *1

 

ZGOOD Wet Model Shaping Trimmer Wet Model Abrasive Diamond Disc